How to Install a Power Inverter in a Van
Power and Energy

How to Install a Power Inverter in a Van (8 Easy Steps)

A van without an inverter is lifeless. If you’re the one who wants some exciting activities to take place while on the road, then going for a highly well-performing inverter is perhaps the only option left there. 

But, you may not know how to install a power inverter in a van in the first place. That’s why we’re here for you. As a quality inverter would completely transform the outdoor experience to a certain extent, it’s imperative to learn the mechanism correctly. 

How to Install a Power Inverter in a Van 

So, right now, we’ll try to demonstrate to you how to easily install a power inverter in a step by step guide. Stick with us and go through the brief lesson to get it mounted within a short period. 

Finding Out the Best Place to Install It 

First thing all the inverter users should understand is to keep them at a close reach. You can install it in different locations inside the van, from, under the dash to behind the seats. Some even mount them on the back of their van to charge up the scooter during travel. 

So, you’d have to understand this mechanism as well. And try mounting it at the best possible location where you can reach it easily. As a result, you’d be able to plug the gadgets in without much hassle. 

A couple of Things to Keep in Mind While Selecting a Location:

Keep them Close to the battery. 

If your inverter is placed at a distant location from the battery, it will get the van filled with wirings. We find it better to install the inverter close to the shower to reduce a wiring mess. 

Grounding is important 

If your desired place isn’t providing the necessary grounding, then that’s a problem. You must have intelligent ways of managing the earthing system for the inverter and the van’s overall safety. 

Keep it Away from Additional Heat 

Inverters, after running long hours, can get heated by themselves. Receiving extra heat from other sources can intensify the problem to an authoritarian state. That’s why you must find out a location that doesn’t provide additional heating. 

On the other hand, airflow is another must-consideration factor while installing inverters. If it’s placed inside compartments covered from all directions and has a low airflow mechanism, your inverter would become dangerously heated up. Also, you can check another article the inverter’s 7 Common Problems & Solutions.

Wire the Battery to the Inverter 

You can use wiring easily to connect the two appliances without much hassle. Here are the steps you should follow while doing so. 

  1. First, attach the black colored cable to the negative terminal of your battery. It’s your job to tighten up the connection properly after connecting it correctly, so it doesn’t get detached easily.
  2. Similarly, trace the other end of the cable and connect it to the inverters’ black terminals. 
  3. Please find out the red cable and route it from the end of the inverter to the battery’s end but DO NOT connect right away. Connecting the red one can get slightly risky; that’s why leave it to be done later on the procedure.
  4. At this stage of the entire task, you should now deal with the earthing. Many worry about the earthing, but it’s easy. Get grounding wires specially designed for this purpose and use them to conduct earthing correctly. Then attach it to the desired grounding point or on any metal surface of the van. 
  5. Finally, to end the entire process, connect the remaining wires between the inverter and the battery. 

Utilization of Appropriate Crimper Tool 

You need to select suitable crimper tools that fit the wires correctly. Especially tackling bulky gauge wires becomes a problem. For this, you can use a hydraulic crimper. It will easily aid the user crimp lugs and screw them in place. 

Protecting the Wires 

Safeguarding the wires for wear and tear is another critical issue you should look at. You can use grommets to protect them from sharp edges while getting them in through drilled holes. This practice isn’t required for the grounding wires.

Fuse Installation 

Another critical aspect while doing the entire job is to install the fuse. Remember, it’s better to install it before you start wiring. 

Using Zip Ties

It’s always the best practice to use zip ties while wiring the entire area. Using zip ties will bring the untidy wirings into place and reduce the unnecessary mess in your van, making extra space.

Test the Connection

After you’re done with everything, now is the time to put it to the ultimate test to see whether whatever you’ve done in the previous stages were correctly conducted. But before you begin the testing, we’d ask you to go through the connection once again. 

See if all the connectors are attached correctly and wires are following the correct attaching points. And keep the power inverter turned off before for precautionary actions. 

And now it’s time to connect the red wire we talked about in the beginning stage. After connecting the red wire, you’re good to go! Turn the power ON of your inverter and see if it works. 

If you’ve followed the previous instructions with care and precision, then it should be up and running well. Now, you can easily use the laptop, TV, refrigerator, lights, and many other electronic devices in your van!

Also, check Power inverter for sump pump

To Sum Up

We have demonstrated to you the entire function of how to install a power inverter in a van. If you want the van to provide all sorts of required electrical services from running TV and mini-refrigerator to laptops and other smart devices, then it’s now time for you to do it. 

But do remember to use cautions like not installing on top of engines or batteries and implanting it on dry waterproof surfaces, and the rest should work just fine! So, good luck with your RV holidays this coming winter!

As an Amazon Associate, I earn from qualifying purchases.

Leave a Reply

Your email address will not be published.

Social media & sharing icons powered by UltimatelySocial
Follow by Email