How To Remove Nozzle From Sun Joe Pressure Washer
Home Improvement & Tools

How To Remove Nozzle From Sun Joe Pressure Washer [4 Easy Steps]

When it comes time to clean your patio, driveway, or deck, you reach for your Sun Joe pressure washer. You start the engine and begin blasting away the dirt and grime–but wait! There’s something wrong. 

The nozzle is clogged, and the water is barely streaming out. But, how to remove nozzle from Sun Joe pressure washer?

Like most other people, you’ve probably had the frustrating experience of trying to get the nozzle off your pressure washer. The situation becomes worse when the nozzle is clogged.

That’s the reason why removing the nozzle seems easy, but actually not. Don’t worry; we have a simple DIY guide for you to get your job done. 

Why It’s Important to Remove Your Nozzle from Sun Joe Pressure Washer?

There are lots of reasons why you should refrain from removing the nozzle from your pressure washer. In practical terms, thinking about these reasons can help alleviate the uncertainties you may be worried about in the future.

Cleaning Debris

By regularly ridding your pressure washer of debris, you can revive its optimal cleanliness and function for a long time.

This represents a great reason why to keep your pressure cleaner cleaned out well. By removing the nozzle, you could perform your chores with less effort. 

For Diminishing Damage

This one is a great reason to be remembered when choosing a nozzle for your pressure washing system.

When considering the best pressure nozzle for your pressure washer, just think about the wasted time and energy you would have to waste on repairing it. 

For Proper Maintenance

When the pump isn’t connected to the power nozzle of your pressure washer, it’s a way of cleaning it.

Regularly ensuring that your pressure washer is clean, you prolong the life of your machines and appliances as well as maintain cleanliness. This is a practice for hygiene and properly maintained machines and appliances.

For The Replacement

Wiping the nozzle with the same pressure washer as usual will affect the cleaning potential, and the cleaning time will increase as a result. 

The cleaning capacity of the pressure washer is reduced due to the decrease in pressure caused by the worn pressure washer nozzle. 

The diameter of the pressure washer nozzle falls to as low as 10 percent of its original size, the pressure will decrease at 21 percent. At this point, you must go for a replacement, and here, you have to remove the nozzle. 

How To Remove Nozzle From Sun Joe Pressure Washer

sun joe pressure washer nozzle

Removing a nozzle from a pressure washer can be a daunting task, but it can be done relatively easily with the right tools and a little bit of know-how.

Here we’ve compiled a guide on how to remove the pressure washer nozzle with several methods. If one seems ineffective, you can go for another.

Method 1: Use Pliers to Remove Nozzle

The first thing you’ll need is a pair of pliers. You’ll also need to find the screw that’s holding the nozzle in place. It’s on the bottom of the wand, and it’s pretty small so it might be hard to see. 

Once you’ve found it, use the pliers to loosen the screw. Be sure to hold onto the nozzle tightly while loosening the bolts, as they may come loose suddenly. 

If they do, you may end up spraying yourself or someone else with water from the pressure washer. Once the bolts are loose, remove them and pull the nozzle off of the pressure washer. 

Method 2: Use Channel Locks to Remove Nozzle

When you’re trying to remove a nozzle from a hose, the normal way to do it is by using your hands.

However, this can be difficult if the nozzle is tight or if there is corrosion on the threads. In these cases, you can use channel locks to remove the nozzle. 

To remove the nozzle, fit your channel locks on opposite sides of the hose. Then, rotate the nozzle to loosen it. Apply a little pressure to the hose and then remove it from the nozzle by pulling it off.

Method 3: Use a Wrench to Remove the Nozzle

If the nozzle is stuck and will not budge, you can try to remove it with a wrench. Place the wrench over the top of the nozzle and turn it counterclockwise. If it is still stuck, apply more force and continue to turn it until it comes off.

In case it doesn’t work, you may need to use a hammer to tap the wrench onto the nozzle. Be careful not to damage the pipe while you’re doing this.

Method 4: Use a Screwdriver to Remove the Nozzle 

If the nozzle on your pressure washer is clogged and you can’t remove it with Method 1 or Method 2, try using a screwdriver to pry it off. First, remove the screw that holds the nozzle in place. 

Then, use the screwdriver to pry the nozzle off of the pressure washer. Be careful not to damage the threads on the pressure washer. 


  • What is a nozzle?

A nozzle is a device that increases the velocity of a fluid passing through it. Due to the increased velocity, the pressure of the fluid decreases as it passes through the nozzle. This decrease in pressure causes the fluid to accelerate as it exits the nozzle.

  • What are the different nozzles on a pressure washer?

Pressure washers contain an assortment of spray nozzles. The number of spray nozzles will depend upon the washer. There are 6 primary types, including 0-degree, 15-degree, 25-degree, 40-degree, soap, and Turbo.

  • How do I choose a pressure washer nozzle?

If you’re cleaning a hard surface like concrete or brick, you’ll want a nozzle with a high degree of sharpness. This will help cut through the dirt and grime. In case, you’re cleaning a flat surface like a driveway, a fan nozzle is best. For curved surfaces or tougher dirt, try a cone or adjustable nozzle.


Hopefully, you’ve learned how to remove nozzle from Sun Joe Pressure washer. Our simple but effective guide might help you when you’re going through a hard time with your pressure washer. So, try to follow all the instructions carefully.

As an Amazon Associate, I earn from qualifying purchases.

Leave a Reply

Your email address will not be published.

Social media & sharing icons powered by UltimatelySocial
Follow by Email